Xulvi-Brunet–Sokolov algorithm

Xulvi-Brunet–Sokolov algorithm

Xulvi-Brunet and Sokolov's algorithm generates networks with chosen degree correlations. This method is based on link rewiring, in which the desired degree is governed by parameter ρ. By varying this single parameter it is possible to generate networks from random (when ρ = 0) to perfectly assortative or disassortative (when ρ = 1). This algorithm allows to keep network's degree distribution unchanged when changing the value of ρ. == Assortative model == In assortative networks, well-connected nodes are likely to be connected to other highly connected nodes. Social networks are examples of assortative networks. This means that an assortative network has the property that almost all nodes with the same degree are linked only between themselves. The Xulvi-Brunet–Sokolov algorithm for this type of networks is the following. In a given network, two links connecting four different nodes are chosen randomly. These nodes are ordered by their degrees. Then, with probability ρ, the links are randomly rewired in such a way that one link connects the two nodes with the smaller degrees and the other connects the two nodes with the larger degrees. If one or both of these links already existed in the network, the step is discarded and is repeated again. Thus, there will be no self-connected nodes or multiple links connecting the same two nodes. Different degrees of assortativity of a network can be achieved by changing the parameter ρ. Assortative networks are characterized by highly connected groups of nodes with similar degree. As assortativity grows, the average path length and clustering coefficient increase. == Disassortative model == In disassortative networks, highly connected nodes tend to connect to less-well-connected nodes with larger probability than in uncorrelated networks. Examples of such networks include biological networks. The Xulvi-Brunet and Sokolov's algorithm for this type of networks is similar to the one for assortative networks with one minor change. As before, two links of four nodes are randomly chosen and the nodes are ordered with respect to their degrees. However, in this case, the links are rewired (with probability p) such that one link connects the highest connected node with the node with the lowest degree and the other link connects the two remaining nodes randomly with probability 1 − ρ. Similarly, if the new links already existed, the previous step is repeated. This algorithm does not change the degree of nodes and thus the degree distribution of the network.

Lexical choice

Lexical choice is the subtask of Natural language generation that involves choosing the content words (nouns, non-auxiliary verbs, adjectives, and adverbs) in a generated text. Function words (determiners, for example) are usually chosen during realisation. == Examples == The simplest type of lexical choice involves mapping a domain concept (perhaps represented in an ontology) to a word. For example, the concept Finger might be mapped to the word finger. A more complex situation is when a domain concept is expressed using different words in different situations. For example, the domain concept Value-Change can be expressed in many ways: The temperature rose: the verb rose is used for a Value-Change in temperature which increases the value. The temperature fell: the verb fell is used for a Value-Change in temperature which decreases the value. The rain got heavier: the phrase got heavier is used for a Value-Change in precipitation amount when the precipitation is rain. Sometimes words can communicate additional contextual information, for example: The temperature plummeted: the verb plummeted is used for a Value-Change in temperature which decreases the value, when the change is rapid and large. Contextual information is especially significant for vague terms such as tall. For example, a 2m tall man is tall, but a 2m tall horse is small. == Linguistic perspective == Lexical choice modules must be informed by linguistic knowledge of how the system's input data maps onto words. This is a question of semantics, but it is also influenced by syntactic factors (such as collocation effects) and pragmatic factors (such as context). Hence NLG systems need linguistic models of how meaning is mapped to words in the target domain (genre) of the NLG system. Genre tends to be very important; for example the verb veer has a very specific meaning in weather forecasts (wind direction is changing in a clockwise direction) which it does not have in general English, and a weather-forecast generator must be aware of this genre-specific meaning. In some cases there are major differences in how different people use the same word; for example, some people use by evening to mean 6PM and others use it to mean midnight. Psycholinguists have shown that when people speak to each other, they agree on a common interpretation via lexical alignment; this is not something which NLG systems can yet do. Ultimately, lexical choice must deal with the fundamental issue of how language relates to the non-linguistic world. For example, a system which chose colour terms such as red to describe objects in a digital image would need to know which RGB pixel values could generally be described as red; how this was influenced by visual (lighting, other objects in the scene) and linguistic (other objects being discussed) context; what pragmatic connotations were associated with red (for example, when an apple is called red, it is assumed to be ripe as well as have the colour red); and so forth. == Algorithms and models == A number of algorithms and models have been developed for lexical choice in the research community, for example Edmonds developed a model for choosing between near-synonyms (words with similar core meanings but different connotations). However such algorithms and models have not been widely used in applied NLG systems; such systems have instead often used quite simple computational models, and invested development effort in linguistic analysis instead of algorithm development.

The Quantum Thief

The Quantum Thief is the debut science fiction novel by Finnish writer Hannu Rajaniemi and the first novel in a trilogy featuring the character of Jean le Flambeur; the sequels are The Fractal Prince (2012) and The Causal Angel (2014). The novel was published in Britain by Gollancz in 2010, and by Tor in 2011 in the US. It is a heist story, set in a futuristic Solar System, that features a protagonist modeled on Arsène Lupin, the gentleman thief of Maurice Leblanc. The novel was nominated for the 2011 Locus Award for Best First Novel, and was second runner-up for the 2011 Campbell Memorial Award. == Setting == Several centuries after the technological singularity largely destroyed Earth, various posthuman factions compete for dominance in the Solar System. Though sentient superintelligent AGI has never been successfully developed, civilization has been greatly transformed by the proliferation of Hansonian brain emulations (termed "gogols" in reference to Nikolai Gogol, and in particular his novel Dead Souls). An alliance of powerful gogol copies rule the inner system from computronium megastructures housing trillions of virtual minds, laboring to resurrect the dead in religious devotion to the philosophy of Nikolai Fedorov. This alliance, the Sobornost, has been in conflict with a community of quantum entangled minds who adhere to the "no-cloning" principle of quantum information theory, and so do not see the Sobornost's ultimate goal as resurrection, but death. Most of this community, the Zoku, was devastated when Jupiter was destroyed with a weaponized gravitational singularity. Among the last remnants of near-baseline humanity exist on the mobile cities of Mars, where advanced cryptography and an obsessive privacy culture ensure that the Sobornost cannot upload their citizens' minds. The most notable of these cities is the Oubliette, where time is used as a currency. When a citizen's balance reaches zero their mind is transferred to a robotic body to serve the needs of the city for a set period, before being returned to their original body with a restored balance of time. == Plot summary == Countless gogols of the legendary gentleman thief Jean Le Flambeur are trapped in a virtual Sobornost prison in orbit around Neptune, playing an iterated prisoner's dilemma until his mind learns to cooperate. A warrior from the Oort Cloud, which has been settled by Finnish colonists, successfully retrieves one of the Le Flambeur gogols and uploads it into a real-space body. Acting on behalf of a competing Sobornost authority, this Oortian, Mieli, ferries the thief to the Martian city known as The Oubliette, where he has stored his memories for later recovery. The two intend to recover his memories so that he may return to an operating capacity sufficient to serve his Sobornost benefactor in a theft and repay his liberation. On the Oubliette, the young detective Isidore Beautrelet helps vigilantes catch Sobornost agents illicitly uploading human minds. These vigilantes are revealed to be in the service of a local colony of Zoku. Beautrelet is employed to investigate the arrival of Le Flambeur, and in the process becomes aware that the Oubliette's cryptographic security was always compromised. The memories of its citizens are fabrications, and the "King of Mars" long believed ousted in a revolution, still reigns behind the scenes. This King, who is another copy of Jean Le Flambeur, is defeated in the ensuing conflict. Le Flambeur fails to recover all of his memories, which he had locked with a quantum entangled revolver that required him to kill several of his old friends to open his stored memory. He and Mieli escape a liberated Mars having recovered only a mysterious "Schrödinger’s Box" from the Memory Palace. == Themes == Themes central to The Quantum Thief are the unreliability and malleability of memory and the effects of extreme longevity on an individual's perspective and personality. Prisons, surveillance and control in society are also major themes. In the book, the people living in the Oubliette society on Mars have two types of memory; in addition to a traditional, personal memory, there is the exomemory, which can be accessed by other people, from anywhere in the city. Memories about personal experiences can be stored in the exomemory and partitioned, with different levels of access granted to different people. These memories can be used, among other things, as an expedient form of communication. The Oubliette society has an economy where time is used as currency. When an individual's time is expended, their consciousness is uploaded into a "Quiet". The Quiet are mute machine servants who maintain and protect the city. Although the quiet seem to have little interest in the world outside their occupations, they do seem to retain some traces of their former personalities and memories. The conspiracy central to the plot involves the hidden rulers, called the "cryptarchs", manipulating and abusing the exomemory and through the citizens' transformations to quiet and back, the traditional memory as well. In the book, the Oubliette society is compared to a panopticon; a prison, where every action of the dwellers can be scrutinized. == History and influences == The first chapter of The Quantum Thief was presented by Rajaniemi's literary agent, John Jarrold, to Gollancz as the basis for the three-book deal that was eventually secured. Rajaniemi has stated that he had "come up with an outline that had every single idea I could cram into it, because I wanted to be worthy of what had happened." The outline eventually expanded into three parts, and the first part became The Quantum Thief. The novel's plot was inspired by one of Rajaniemi's favorite characters in fiction, Maurice Leblanc's gentleman thief Arsène Lupin, who operates on both sides of the law. What intrigued Rajaniemi were the cycles of redemption and relapse Lupin goes through as he tries to go straight, always falling short. Besides LeBlanc, Rajaniemi mentioned Roger Zelazny as a strong influence. Ian McDonald was the other science fiction author he mentioned as influential, plus Frances A.Yates's book The Art of Memory, for memory palaces. In an interview, Rajaniemi said he wasn't trying to write the novel as hard science fiction: "For me, the more important consequence of having a scientific background is a degree of speculative rigour: trying hard to work out the consequences of the assumptions one begins with." == Reception == The novel has received generally positive reviews. Gary K. Wolfe writes in his Locus review that Rajaniemi has "spectacularly delivered on the promise that this is likely the most important debut SF novel we'll see this year". James Lovegrove, reviewing the book in his Financial Times column, notes that "many an anglophone author would kill to turn out prose half as good as this, especially on their maiden effort." Eric Brown, reviewing for The Guardian, finds the novel to be "a brilliant debut", while alluding to the "apocryphal" (and incorrect) myth that "this novel sold on the strength of its first line." Sam Bandah, at SciFiNow, praises the novel for "its engaging narrative and characters backed by often almost intimidatingly good sci-fi concepts." Criticism for the novel has generally centred on Rajaniemi's sparse "show, don't tell" writing style. Brown notes that "the author makes no concessions to the lazy reader with info-dumps or convenient explanations." Niall Alexander, of the Speculative Scotsman, states that "had there been some sort of index, [he] would have gladly (and repeatedly) referred to it during the mind-boggling first third of The Quantum Thief", while proclaiming the novel to be "the sci-fi debut of 2010." == Awards == Nominee for the 2011 Locus Award for Best First Novel. Third place for the 2011 John W. Campbell Memorial Award for Best Science Fiction Novel

Fuzzy associative matrix

A fuzzy associative matrix expresses fuzzy logic rules in tabular form. These rules usually take two variables as input, mapping cleanly to a two-dimensional matrix, although theoretically a matrix of any number of dimensions is possible. From the perspective of neuro-fuzzy systems, the mathematical matrix is called a "Fuzzy associative memory" because it stores the weights of the perceptron. == Applications == In the context of game AI programming, a fuzzy associative matrix helps to develop the rules for non-player characters. Suppose a professional is tasked with writing fuzzy logic rules for a video game monster. In the game being built, entities have two variables: hit points (HP) and firepower (FP): This translates to: IF MonsterHP IS VeryLowHP AND MonsterFP IS VeryWeakFP THEN Retreat IF MonsterHP IS LowHP AND MonsterFP IS VeryWeakFP THEN Retreat IF MonsterHP IS MediumHP AND MonsterFP is VeryWeakFP THEN Defend Multiple rules can fire at once, and often will, because the distinction between "very low" and "low" is fuzzy. If it is more "very low" than it is low, then the "very low" rule will generate a stronger response. The program will evaluate all the rules that fire and use an appropriate defuzzification method to generate its actual response. An implementation of this system might use either the matrix or the explicit IF/THEN form. The matrix makes it easy to visualize the system, but it also makes it impossible to add a third variable just for one rule, so it is less flexible. == Identify a rule set == There is no inherent pattern in the matrix. It appears as if the rules were just made up, and indeed they were. This is both a strength and a weakness of fuzzy logic in general. It is often impractical or impossible to find an exact set of rules or formulae for dealing with a specific situation. For a sufficiently complex game, a mathematician would not be able to study the system and figure out a mathematically accurate set of rules. However, this weakness is intrinsic to the realities of the situation, not of fuzzy logic itself. The strength of the system is that even if one of the rules is wrong, even greatly wrong, other rules that are correct are likely to fire as well and they may compensate for the error. This does not mean a fuzzy system should be sloppy. Depending on the system, it might get away with being sloppy, but it will underperform. While the rules are fairly arbitrary, they should be chosen carefully. If possible, an expert should decide on the rules, and the sets and rules should be tested vigorously and refined as needed. In this way, a fuzzy system is like an expert system. (Fuzzy logic is used in many true expert systems, as well.)

Tempos Modernos

Tempos Modernos (English: Modern Times) is a Brazilian telenovela produced and broadcast by TV Globo. It premiered on 11 January 2010, replacing Caras & Bocas, and ended on 16 July 2010, replaced by Ti Ti Ti. The series is written by Bosco Brasil, with the collaboration of Izabel de Oliveira, Maria Elisa Berredo, Mário Teixeira and Patrícia Moretzsohn. It stars Fernanda Vasconcellos, Thiago Rodrigues, Antônio Fagundes, and Eliane Giardini. Priscila Fantin, Danton Mello, Marcos Caruso, Regiane Alves, Vivianne Pasmanter, Otávio Muller, Felipe Camargo, and Malu Galli also star in main roles. == Cast == Fernanda Vasconcellos as Cornélia Cordeiro Santos Reis "Nelinha" Thiago Rodrigues as José Carlos Pimenta Cordeiro "Zeca" Antônio Fagundes as Leal Cordeiro Eliane Giardini as Hélia Pimenta Priscila Fantin as Nara Nolasco Marcos Caruso as Otto Niemann Vivianne Pasmanter as Regiane Cordeiro Mourão Regiane Alves as Goretti Cordeiro Bodanski "Gô" Otávio Muller as Altemir Assunção da Paz Bodanski (Bodanski) Felipe Camargo as Vinícius Porto de Mello "Portinho" Danton Mello as Renato Vieira de Mattos Alessandra Maestrini as Benedita Kusnezov Piñon "Dita'" Leonardo Medeiros as Ramon Piñon Guilherme Weber as Albano Mourão Grazi Massafera as Deodora Madureira Niemann / N. Anne Malu Galli as Iolanda Paranhos Guilherme Leicam as Led Piñon Aline Peixoto as Jannis Piñon Caroline Abras as Katrina João Baldasserini as Túlio Osório Débora Duarte as Tertuliana "Tertu" Otávio Augusto as Faustaço Lumbriga Selma Egrei as Tamara Palumbo Genézio de Barros as Pasquale Paula Possani as Maureen Lobianco Ricardo Blat as Fidélio Pascoal da Conceição as Zuppo Tuna Dwek as Justine Jairo Mattos as Gaulês "Jean Paul" Luciana Borghi as Bárbara Lee Cris Vianna as Tita Bicalho Edmilson Barros as Lindomar Mariano Assunção Cláudia Missura as Lavínia Palumbo Victor Pecoraro as Ricardo Maurício "Maurição" Naruna Costa as Dolores Damasceno Antônio Fragoso as Zapata Fabrício Boliveira as Nabuco Mota Eliana Pittman as Miranda Paranhos Márcio Seixas as Frankenstein "Frank" (voice) Joana Lerner as Heloísa "Helô" Darlan Cunha as João Carlos Paranhos "Joca" Janaína Ávila as Milena Morgado Anderson Lau as Okuda Alexandra Martins as Dulcinólia Lumbriga "Duba" Paulo Leal de Melo as Raulzão "Ducha Fria" Cássio Inácio as Tartana Gilberto Miranda as Madrugadinha Rafa Martins as Max do Cavaco Isabel Lobo as Thaís Trancoso Alexandre Cioletti as Valvênio Xandy Britto as Nelsinho Pallotti Polliana Aleixo as Maria Eunice Cordeiro Bodanski Ana Karolina Lannes as Maria Eugênia Cordeiro Bodanski Rebeca Orestein as Maria Helena Cordeiro Bodanski Jenifer de Oliveira Andrade as Maria Clara Cordeiro Bodanski

Color management

Color management is the process of ensuring consistent and accurate colors across various devices, such as monitors, printers, and cameras. It involves the use of color profiles, which are standardized descriptions of how colors should be displayed or reproduced. Color management is necessary because different devices have different color capabilities and characteristics. For example, a monitor may display colors differently than a printer can reproduce them. Without color management, the same image may appear differently on different devices, leading to inconsistencies and inaccuracies. To achieve color management, a color profile is created for each device involved in the color workflow. This profile describes the device's color capabilities and characteristics, such as its color gamut (range of colors it can display or reproduce) and color temperature. These profiles are then used to translate colors between devices, ensuring consistent and accurate color reproduction. Color management is particularly important in industries such as graphic design, photography, and printing, where accurate color representation is crucial. It helps to maintain color consistency throughout the entire workflow, from capturing an image to displaying or printing it. Parts of color management are implemented in the operating system (OS), helper libraries, the application, and devices. The type of color profile that is typically used is called an ICC profile. A cross-platform view of color management is the use of an ICC-compatible color management system. The International Color Consortium (ICC) is an industry consortium that has defined: an open standard for a Color Matching Module (CMM) at the OS level color profiles for: devices, including DeviceLink profiles that transform one device profile (color space) to another device profile without passing through an intermediate color space, such as LAB, more accurately preserving color working spaces, the color spaces in which color data is meant to be manipulated There are other approaches to color management besides using ICC profiles. This is partly due to history and partly because of other needs than the ICC standard covers. The film and broadcasting industries make use of some of the same concepts, but they frequently rely on more limited boutique solutions. The film industry, for instance, often uses 3D LUTs (lookup table) to represent a complete color transformation for a specific RGB encoding. At the consumer level, system wide color management is available in most of Apple's products (macOS, iOS, iPadOS, watchOS). Microsoft Windows lacks system wide color management and virtually all applications do not employ color management. Windows' media player API is not color space aware, and if applications want to color manage videos manually, they have to incur significant performance and power consumption penalties. Android supports system wide color management, but most devices ship with color management disabled. == Overview == Characterize. Every color-managed device requires a personalized table, or "color profile," which characterizes the color response of that particular device. Standardize. Each color profile describes these colors relative to a standardized set of reference colors (the "Profile Connection Space"). Translate. Color-managed software then uses these standardized profiles to translate color from one device to another. This is usually performed by a color management module (CMM). == Hardware == === Characterization === To describe the behavior of various output devices, they must be compared (measured) in relation to a standard color space. Often a step called linearization is performed first, to undo the effect of gamma correction that was done to get the most out of limited 8-bit color paths. Instruments used for measuring device colors include colorimeters and spectrophotometers. As an intermediate result, the device gamut is described in the form of scattered measurement data. The transformation of the scattered measurement data into a more regular form, usable by the application, is called profiling. Profiling is a complex process involving mathematics, intense computation, judgment, testing, and iteration. After the profiling is finished, an idealized color description of the device is created. This description is called a profile. === Calibration === Calibration is like characterization, except that it can include the adjustment of the device, as opposed to just the measurement of the device. Color management is sometimes sidestepped by calibrating devices to a common standard color space such as sRGB; when such calibration is done well enough, no color translations are needed to get all devices to handle colors consistently. This avoidance of the complexity of color management was one of the goals in the development of sRGB. == Color profiles == === Embedding === Image formats themselves (such as TIFF, JPEG, PNG, EPS, PDF, and SVG) may contain embedded color profiles but are not required to do so by the image format. The International Color Consortium standard was created to bring various developers and manufacturers together. The ICC standard permits the exchange of output device characteristics and color spaces in the form of metadata. This allows the embedding of color profiles into images as well as storing them in a database or a profile directory. === Working spaces === Working spaces, such as sRGB, Adobe RGB or ProPhoto are color spaces that facilitate good results while editing. For instance, pixels with equal values of R,G,B should appear neutral. Using a large (gamut) working space will lead to posterization, while using a small working space will lead to clipping. This trade-off is a consideration for the critical image editor. == Color transformation == Color transformation, or color space conversion, is the transformation of the representation of a color from one color space to another. This calculation is required whenever data is exchanged inside a color-managed chain and carried out by a Color Matching Module. Transforming profiled color information to different output devices is achieved by referencing the profile data into a standard color space. It makes it easier to convert colors from one device to a selected standard color space and from that to the colors of another device. By ensuring that the reference color space covers the many possible colors that humans can see, this concept allows one to exchange colors between many different color output devices. Color transformations can be represented by two profiles (source profile and target profile) or by a devicelink profile. In this process there are approximations involved which make sure that the image keeps its important color qualities and also gives an opportunity to control on how the colors are being changed. === Profile connection space === In the terminology of the International Color Consortium, a translation between two color spaces can go through a profile connection space (PCS): Color Space 1 → PCS (CIELAB or CIEXYZ) → Color space 2; conversions into and out of the PCS are each specified by a profile. === Gamut mapping === In nearly every translation process, we have to deal with the fact that the color gamut of different devices vary in range which makes an accurate reproduction impossible. They therefore need some rearrangement near the borders of the gamut. Some colors must be shifted to the inside of the gamut, as they otherwise cannot be represented on the output device and would simply be clipped. This so-called gamut mismatch occurs for example, when we translate from the RGB color space with a wider gamut into the CMYK color space with a narrower gamut range. In this example, the dark highly saturated purplish-blue color of a typical computer monitor's "blue" primary is impossible to print on paper with a typical CMYK printer. The nearest approximation within the printer's gamut will be much less saturated. Conversely, an inkjet printer's "cyan" primary, a saturated mid-brightness blue, is outside the gamut of a typical computer monitor. The color management system can utilize various methods to achieve desired results and give experienced users control of the gamut mapping behavior. ==== Rendering intent ==== When the gamut of source color space exceeds that of the destination, saturated colors are liable to become clipped (inaccurately represented), or more formally burned. The color management module can deal with this problem in several ways. The ICC specification includes four different rendering intents, listed below. Before the actual rendering intent is carried out, one can temporarily simulate the rendering by soft proofing. It is a useful tool as it predicts the outcome of the colors and is available as an application in many color management systems: Absolute colorimetric Absolute colorimetry and relative colorimetry actually use the same table but differ in the adjust

Asian Digital Finance Forum & Awards

Asian Digital Finance Forum & Awards (also known as Asian Digital Finance Forum and Awards) is a forum and honorary awards platform convened in Colombo, Sri Lanka. It has been hosted in a hybrid format (virtual and in-person), with editions reported in 2022, 2023 and 2025. The event is organised by the Asian FinTech Academy (AFTA) in collaboration with a number of local and international institutions. == Overview == The forum has featured international academic, industry, and policy speakers and has recognised institutions and individuals for contributions related to digital finance and fintech innovation. Media coverage has described participation and recognition at the forum as spanning multiple regions, with institutions and individuals from South Asia, Southeast Asia, East Asia, the Middle East, Europe, and North America featured across different editions. == Awards and recognition == The forum and awards were held in a hybrid format with virtual and in-person proceedings at Hilton Colombo in the 2022 and 2023 editions. The Asian Digital Finance Forum & Awards presents honorary recognitions to institutions and individuals for contributions to digital finance, financial inclusion, and related regulatory, technological, and policy developments. Media coverage has described the recognitions as non-competitive and based on demonstrated leadership and impact rather than open nominations. In 2025, the forum and awards served as an anchor initiative associated with the Asia International Digital Economy & AI in Finance Summit at Port City Colombo, with an emphasis on artificial intelligence in finance, financial inclusion, and governance-related themes. === 2022 === According to reporting by Daily FT, institutions recognised at the 2022 edition included Sri Lanka’s Bank of Ceylon, Commercial Bank of Ceylon, Hatton National Bank, and People’s Bank, alongside international organisations and fintech-sector contributors. === 2023 === Coverage of the 2023 forum described recognitions awarded to India’s International Financial Services Centres Authority (IFSCA) for regulatory innovation, as well as to digital finance and payments platforms including Dialog Genie and SLT-Mobitel mCash. IDEMIA’s Asia–Pacific operations were also recognised for contributions related to biometric and digital identity technologies in financial services. === 2025 === For the 2025 edition, institutional honourees reported in the media included Nium (Singapore), recognised for cross-border payments optimisation, and Paytm (India), recognised for AI-powered financial inclusion initiatives. A Visionary Award for Next-Generation Financial Hub Development was presented to Port City Colombo in recognition of its fintech- and AI-oriented development strategy. Individual honourees reported for 2025 included Sopnendu Mohanty (Singapore), Neil Tan (Hong Kong), Purvi Munot (United Arab Emirates), and Amira Abdelaziz (Egypt), recognised for contributions spanning fintech governance, ecosystem development, inclusive wealth technology, and AI-driven financial policy and regulation. In 2025, media reports described the awards as being subject to an independent validation framework. The process was led by Dr. Sivaguru S. Sritharan, appointed as Global Validation Chair, and involved independent research, analytical review, and benchmarking against international standards, with recognitions characterised as honorary and non-competitive.